Xenopixel Lightsaber Instructions

Lightsaber Instructions for our Xenopixel models.

1. Powering on and off (make sure it is charged first):

To awaken the saber from deep-sleep mode, hold the button for 4 seconds.
To ignite the saber, click the button once or twist the saber hilt or swing the saber.
To retract the saber, press and hold the button for 4 seconds or twist the saber hilt.
To put the saber in deep-sleep mode, press and hold the button for 8 seconds.

2. Lightsaber effects (saber must be turned on):

Change blade color: press the button and twist the saber hilt to change the soundfont.
Blaster sound: Tap the button.
Saber Lock-up: Press the button for 1 second and release your finger. Then press the button to activate lock-up. Press it again to end the lock up loop.
Flash-on-clash: The saber will automatically flash white and emit a sound when it hits another surface.
Drag effects: Press and hold the button and hit the tip of the blade or thrust the saber forward.

3. Background music (saber should be in stand-by mode):

Stand-by mode: Saber is turned on but not ignited
Background music: Press and hold the button for 3 seconds to turn on the background sound, switch the background sound, and turn off the background sound.

4. Sound and blade lighting effects (saber should be in stand-by mode):

Changing Soundfonts: Press the button for 4 seconds to change the soundfonts and blade lighting effects. Repeat to cycle through the sound fonts.
Adjusting Volume: Press the button for one 2 second to adjust the volume.

5. Breathing light when charging: